Main page » Small and medium diaphragm condensers » MK-4012 4-D ambisonic A-format microphone

Preview: MK-4012 4-D ambisonic A-format microphone

MK-4012 4-D ambisonic A-format microphone

Mobile Preview: MK-4012 4-D ambisonic A-format microphone

TOP

MK-4012 4-D ambisonic A-format microphone

Product No.:
Shipping time:: ca. 3-4 work days for EU (abroad may vary)

778,86 EUR

incl. 16% tax excl. Shipping costs

Add to wish list

Ask about product

Overview

This microphone will be supplied without capsules and windjummer. The capsules (we recommend MK-012 cardioid capsules) and windjummer (Rycote BBG 20mm) should be ordered separately.

The mic has absolutely the same technical characteristics as regular MK-012 preamp, its cable has four separate XLR-plugs on the end.

Technical specifications

Mic type	Small diaphragm condenser
Polar Pattern	Cardioid, Hypercardioid, Omnidirectional
Freq. Response	20-20000Hz
Phantom voltage required	48 +- 2V
Full impedance, module	less than 300 ohms
Weighted SPL (ref. DIN 45412)	18 dBA
Maximum SPL in 250-8000Hz range, (less than 0.5% THD)	130 db
Free field sensitivity at 1KHz	<10 mV/Pa
Free field sensitivity roll off from 40Hz to 20KHz should not exceed	+- 3 db
Weight with 3 capsules and pad	200 gr
Length, mm	128
Max diameter/width, mm	23
Accessories included	Mic holder
The difference in free field sensitivity between 0° and 90° should be as follows:
For omnidirectional capsule:
in 40-1000 Hz range:	no more than 2 db
in 1-5 KHz range:	no more than 4 db
in 5-8 KHz range:	no more than 8 db
For cardioid capsule:
in 250-8000 Hz range:	no less than 4 db
For hypercardioid capsule:
in 250-5000 Hz range:	no less than 8 db
Average sensitivity difference between O° and 180° for cardioid capsule in 63-12500 Hz range:	16 db

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

MK-4012 4-D ambisonic A-format microphone

This product is compatible with (for example):

This product is similar to: