Shopping Cart
no products

MK-4012 4-D ambisonic A-format microphone

Shippingtime:
ca. 3-4 work days for EU ca. 3-4 work days for EU (abroad may vary)
799,00 EUR
incl. 19% tax excl. Shipping costs

This microphone will be supplied without capsules and windjummer. The capsules (we recommend MK-012 cardioid capsules) and windjummer (Rycote BBG 20mm) should be ordered separately.

The mic has absolutely the same technical characteristics as regular MK-012 preamp, its cable has four separate XLR-plugs on the end.

Mic type Small diaphragm condenser
Polar Pattern Cardioid, Hypercardioid, Omnidirectional
Freq. Response 20-20000Hz
Phantom voltage required 48 +- 2V
Full impedance, module less than 300 ohms
Weighted SPL (ref. DIN 45412) 18 dBA
Maximum SPL in 250-8000Hz range, (less than 0.5% THD) 130 db
Free field sensitivity at 1KHz <10 mV/Pa
Free field sensitivity roll off from 40Hz to 20KHz should not exceed +- 3 db
Weight with 3 capsules and pad 200 gr
Length, mm 128
Max diameter/width, mm 23
Accessories included Mic holder
The difference in free field sensitivity between 0° and 90° should be as follows:
For omnidirectional capsule:
in 40-1000 Hz range: no more than 2 db
in 1-5 KHz range: no more than 4 db
in 5-8 KHz range: no more than 8 db
For cardioid capsule:
in 250-8000 Hz range: no less than 4 db
For hypercardioid capsule:
in 250-5000 Hz range: no less than 8 db
Average sensitivity difference between O° and 180° for cardioid capsule in 63-12500 Hz range: 16 db
This product is compatible with (for example):

Rycote BBG Windshield for MK-4012 Ambisonic mic

Rycote BBG Windshield for MK-4012...

129,00 EUR
This product is similar to:

Rycote BBG Windshield for MK-4012 Ambisonic mic

Rycote BBG Windshield for MK-4012...

129,00 EUR
MK-4012 binding for Rycote BBG 20mm

MK-4012 binding for Rycote BBG 20mm

20,00 EUR